Launch your token

Solana Token Creator

Create your SPL token with logo and metadata in one transaction, and decide right there whether to keep mint and freeze authority.

0/10

0 to 18. Most Solana tokens use 9.

Total tokens minted at creation, sent to your wallet.

0/500

Image

Saved in the token metadata, so wallets and explorers can show them.

Revoke authorities

Buyers check these first: a revoked authority shows nobody can mint, freeze or edit later.

Total fees: 0.1 SOL

Plus about 0.016 SOL in Solana rent and network fees

How it works

Create a Solana token in four steps

This Solana token creator turns a short form into a real SPL token in one transaction. You keep control the whole way: the server prepares the transaction, checks it against the network, and hands it to your wallet. Nothing happens until you approve it there.

  1. 01

    Connect your wallet

    Connect Phantom, Solflare, Backpack or another Solana wallet. It pays the fee and receives the whole supply.

  2. 02

    Describe your token

    Enter the name, symbol, supply and decimals, add a logo, a short description, links and up to five tags.

  3. 03

    Choose the authorities

    Decide whether to revoke mint, freeze and update authority now. Each switch shows its fee next to it.

  4. 04

    Review and sign

    Check every value and the total fee, then approve one transaction in your wallet. The mint address appears seconds later.

Before you start

A wallet with some SOL
Enough for our fee (0.1 SOL, or 0.22 SOL with all three authorities revoked) and about 0.0163 SOL of rent. The tool checks your balance before it uploads anything.
A name and a symbol
Up to 32 characters for the name and 10 for the symbol. Letters, numbers and basic symbols; accented letters count as two.
A supply and decimals
The whole supply is minted to your wallet at once. Most tokens use 9 decimals; anything from 0 to 18 works.
A logo and your links
PNG, JPG, WebP or SVG up to 20 MB. It is shrunk to at most 512 px for wallets. Add a description, website, X, Telegram and Discord if you have them.

What you get

Everything a token needs to show up properly

A token is more than a balance. Wallets and explorers need a name, a symbol and a logo, and traders want to see who can still change it. All of that is set in the same transaction that creates the mint.

  • A standard SPL token

    Made by Solana's own Token Program, the format every wallet, explorer and DEX reads. No custom contract, nothing to audit.
  • Metaplex metadata

    Name, symbol and a link to your logo and description are written on-chain in the Metaplex metadata account wallets look for.
  • Logo stored on Arweave

    Your logo is resized for wallets (512px at most) and stored for good on Arweave with the metadata file.
  • Links and tags

    Add your website, X, Telegram and Discord, plus up to five tags. They go into the metadata explorers display.
  • Authorities in the same step

    Revoke mint, freeze or update authority inside the creation transaction, so the token is never live with powers you meant to give up.
  • Your wallet signs everything

    The server builds and simulates the transaction, your wallet signs it. We never hold your keys or your tokens.

Pricing

What creating a token costs

One flat fee in SOL, plus a fee for each authority you choose to revoke. No subscription, no hidden percentage of your supply. The review step adds it all up before you sign.

Token creator fees
ItemOur fee
Create a tokenSPL token, Metaplex metadata, logo on Arweave0.1 SOL
Revoke mint authorityOptional, at creation+0.04 SOL
Revoke freeze authorityOptional, at creation+0.04 SOL
Revoke update authorityOptional, at creation+0.04 SOL

A token with no revokes costs 0.1 SOL in fees. With mint and freeze revoked, the usual choice for a public launch, it costs 0.18 SOL, and with all three 0.22 SOL. All fees, including the liquidity tools, are on the fees page, and other tools' published prices are in our comparison of Solana token creators.

Network fees and rent, paid on top

Solana charges every new account a deposit called rent, which keeps the account alive. A new token opens three: the mint (about 0.0011 SOL), the metadata account (about 0.0037 SOL) and the token account that holds your supply (about 0.0015 SOL). The Metaplex program also takes its own 0.01 SOL fee for creating metadata.

Together that is roughly 0.0163 SOL, plus a small transaction fee. None of it goes to us. Keep a little more than the total in your wallet: the tool checks your balance before anything is uploaded and tells you exactly how much is missing.

Need a transfer tax instead? The Tax Token Creator costs the same: 0.1 SOL, plus 0.04 SOL per revoke.

Revoke authorities

Three powers you can give up for good

A new Solana token comes with three authorities, all held by your wallet. Buyers check them before they trust a token, because whoever holds them can change the rules after people have bought in.

Revoking at creation is safer than doing it later: there is never a moment when the token is live with powers you meant to drop. It is also cheap here: 0.04 SOL per authority, so a fully locked-down token costs 0.22 SOL in fees instead of 0.1 SOL. A revoke cannot be undone, so keep an authority only when you have a real plan for it. Our guide on mint, freeze and update authority goes through each case.

  • Mint authority

    The right to create more tokens. Revoked, the supply you set today is the supply forever. The tool mints your full supply first and revokes this right after, in the same transaction.
  • Freeze authority

    The right to freeze any holder's token account so it cannot send or sell. Revoked, the mint is created with no freeze authority at all, so no wallet can ever be frozen.
  • Update authority

    The right to change the name, symbol, logo and links. Revoked, the metadata is created immutable and its update authority is set to an address nobody holds a key for.

Some DEXes look at freeze authority too: the pool creator warns you when the token you pick still has one, because many traders and some pool programs avoid tokens that can be frozen.

After you create it

Make it tradable

A new token sits in your wallet and nowhere else until it has a liquidity pool. These tools take it from there, each one a single page with its own review step. Not sure where to start? Read the after-launch checklist.

  • 01

    Create Liquidity Pool

    Open a Raydium or Meteora pool against SOL or USDC. Our fee is 0.05 SOL plus the DEX's own cost.

  • 02

    Burn LP Tokens

    Lock or burn your LP tokens so the liquidity cannot be pulled. 0.05 SOL per lock or burn.

  • 03

    Add Liquidity

    Deepen the pool later with more of both tokens, at the current pool ratio. 0.05 SOL per deposit.

FAQ

Questions about creating a Solana token

How much does it cost to create a Solana token here?

Our fee is 0.1 SOL per token, plus 0.04 SOL for each authority you revoke while creating it. On top of that the network keeps about 0.0163 SOL for rent on the new accounts and the Metaplex metadata fee, plus a small network transaction fee. The review step shows the total before your wallet opens.

Do I need to write code or install anything?

No. You fill in a form in your browser and approve one transaction in your Solana wallet. There is no command line, no smart contract to write and nothing to install besides a wallet.

Which wallets can I use?

Any Solana wallet the site detects, such as Phantom, Solflare or Backpack, as a browser extension. On a phone you can open the site in your wallet's own browser or connect over WalletConnect.

Is the tool custodial? Can you move my tokens?

No. Our server prepares the transaction and your wallet signs it. We never see your private key, and once the token exists, the whole supply sits in your wallet. Mint, freeze and update authority stay with your wallet unless you revoke them.

What token standard does this create?

A classic SPL token made by the Solana Token Program, with Metaplex metadata for the name, symbol and logo. That is the format wallets, explorers and DEXes have supported the longest. If you want a transfer tax, use the Tax Token Creator, which makes a Token-2022 token instead.

Where are my logo and metadata stored?

On Arweave, a network built for permanent storage. Your logo is resized to at most 512 pixels before upload, and the metadata file with the name, description, links and tags is uploaded only after you confirm the review, so nothing is stored for a token you never create.

How many decimals should my token have?

Nine is the default and what most Solana tokens use, including SOL itself. You can pick anything from 0 to 18. Zero decimals makes a whole-number token that cannot be split. Supply times ten to the power of the decimals must fit in a Solana token amount, and the form tells you if it does not.

Should I revoke mint, freeze and update authority?

If you are launching a token for public trading, revoking mint and freeze authority is what most buyers look for: it proves no new tokens can be printed and no wallet can be frozen. Revoking update authority locks the name, symbol and logo for good. Keep an authority only if you have a concrete reason to use it later, because a revoke can never be undone.

How long does creating a token take?

Usually under a minute once you confirm the review: the logo and metadata upload, the transaction is built and checked, you approve it in your wallet, and Solana confirms it within seconds. You then get the mint address and a link to Solscan.

Why is my token not showing a logo in my wallet yet?

Wallets and explorers read the logo from the metadata link, and some cache token data for a while. The token itself exists as soon as the transaction confirms. Give indexers a little time, and check the token's page on Solscan, which reads the metadata directly.

How do I make my token tradable?

Open a liquidity pool. Our pool creator opens one on Raydium or Meteora for 0.05 SOL plus what the DEX itself charges, with your token paired against SOL, USDC or another token. The amounts you deposit set the starting price.

Can I get a refund if I made a mistake?

No. Once the transaction confirms, the token is on-chain and the fee has been paid on-chain with it. That is why every value and the full fee (for example 0.18 SOL with two authorities revoked) is shown on the review step before you sign. If the transaction fails, our fee is not charged.

Guides

Learn before you launch

Plain guides to each step, written for this tool and kept to what it does.

Your token, one transaction away

Fill in the form at the top of the page, check the review, and sign in your own wallet.